bideford
bideford

"Sheet metal drill, parallel shank / 1064" part no. 10640250

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 2.5 mm
Twist length: 9,5 mm
Total length: 43 mm"

£2.30


"Sheet metal drill, parallel shank / 1064" part no. 10640300

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 3.0 mm
Twist length: 11 mm
Total length: 46 mm"

£1.96


"Sheet metal drill, parallel shank / 1064" part no. 10640310

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 3.1 mm
Twist length: 11 mm
Total length: 49 mm"

£2.02


"Sheet metal drill, parallel shank / 1064" part no. 10640320

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 3.2 mm
Twist length: 11 mm
Total length: 49 mm"

£2.02


"Sheet metal drill, parallel shank / 1064" part no. 10640330

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 3.3 mm
Twist length: 11 mm
Total length: 49 mm"

£2.02


"Sheet metal drill, parallel shank / 1064" part no. 10640350

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 3.5 mm
Twist length: 12 mm
Total length: 52 mm"

£2.15


"Sheet metal drill, parallel shank / 1064" part no. 10640400

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 4.0 mm
Twist length: 14 mm
Total length: 55 mm"

£2.64


"Sheet metal drill, parallel shank / 1064" part no. 10640410

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 4.1 mm
Twist length: 14 mm
Total length: 55 mm"

£2.64


"Sheet metal drill, parallel shank / 1064" part no. 10640420

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 4.2 mm
Twist length: 14 mm
Total length: 55 mm"

£2.64


"Sheet metal drill, parallel shank / 1064" part no. 10640450

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 4.5 mm
Twist length: 16 mm
Total length: 58 mm"

£2.73


"Sheet metal drill, parallel shank / 1064" part no. 10640480

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 4.8 mm
Twist length: 17 mm
Total length: 62 mm"

£3.13


"Sheet metal drill, parallel shank / 1064" part no. 10640500

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 5.0 mm
Twist length: 17 mm
Total length: 62 mm"

£2.94


"Sheet metal drill, parallel shank / 1064" part no. 10640510

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 5.1 mm
Twist length: 17 mm
Total length: 62 mm"

£3.37


"Sheet metal drill, parallel shank / 1064" part no. 10640520

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 5.2 mm
Twist length: 17 mm
Total length: 62 mm"

£3.37


"Sheet metal drill, parallel shank / 1064" part no. 10640600

"Extra-short Sheet Metal Drills, Parallel Shank
Design: Length similar to DIN 1897, double-sided.
Short flute and high web strength. Small chisel edge and cylindrically ground circumference (without lands). Surface steam tempered. Profile ground. Bore holes round and precise (important for riveted joints). Particularly suitable for automotive and metal work, for rivet holes, screw holes etc. For drilling of thin workpieces. Centre punching not necessary for positioning of bit.
Other dimensions available on request.
Ø h 8: 6.0 mm
Twist length: 19 mm
Total length: 66 mm"

£3.86

For non UK Orders, please email for carriage charges before ordering